Safety Locks: Convenience And Safety Of Parking

November 04 06:56 2020
Every parking lift, whether it is an tilting parking lift, a garage parking lift, a classic two-post car lift or a four-post parking lift, has mechanical safety locks.

Every parking lift, whether it is an tilting parking lift, a garage parking lift, a classic two-post car lift or a four-post parking lift, has mechanical safety locks.

The mechanical safety lock of the parking lift is designed primarily to securely fix the parking pallet (platform) at the upper lifting point. The presence of a mechanical safety lock prevents the unintentional lowering of the parking pallet (platform) during the storage period.

The device of a mechanical safety lock for parking lifts has some differences from each other due to the differences in designs of different models of lifts. So on tilting parking lifts used locks in the form of hooks, placed under the pallet and engaging at the top lifting point with a lever located on a special rod. Parking lifts with horizontal pallet placement use mechanical locks, the latches of which are also located under the parking pallet, but the engagement slots are already located in the vertical support posts. 

Lock holes of parking lifts, in order to be able to adjust the lifting height of the parking pallet, have a certain pitch, which makes it possible to adjust the lifting height of the pallet (platform) to the overall height of the garage and to the specific height of each vehicle.

The principle of operation of the mechanical lock of a parking lift is quite simple and reliable. When one activate the electro hydraulic drive, the parking platform starts rising. Upon reaching a certain height, the clamps begin to automatically fall into the engagement manholes when lifting and jump higher. When the limit switch of the upper position of the platform is triggered, the rising of the platform stops, at this moment the lock should be in the lock hole. The simultaneous occurrence of these two points is achieved by adjusting the executing devices.

Full range of 17 mechanical lock blocks start from 500mm of the bottom of the post until reach the lifting position. Each block is 70mm high and 80mm gap in between. And it will be activated when there is any failure of the hydraulic system, and hold the platform on the next locking position by the post.

Even if the hydraulic system at some point does not cope with the pressure from the parking platform with the loaded car (exceeding the maximum allowable weight of the car) or from long-term operation without the necessary maintenance of the parking lift, oil will start to leak and pressure drops in the hydraulic circuit, this will not lead to lowering of the pallet or unpleasant situations.

Media Contact
Company Name: Mutrade LTD
Contact Person: Media Relations
Email: Send Email
Phone: +86 532 5557 9606
Address:No.106 Haier Road, Tongji Street Office
City: Qingdao 266200
State: Jimo
Country: China
Website: https://www.mutrade.com/

  Categories: